Selkirk Copper Announces Initial Results from the Phase 2 Drill Program and Commencement of Technical Data Collection to Support Planned Feasibility Study

Vancouver, British Columbia, July 8th, 2026, FinanceWire

Highlights

• The planned 50,000 metre Phase 2 drill program is advancing rapidly and ahead of schedule, with 27,300 metres completed during the first two months of drilling.
• Initial assay results from exploration drilling demonstrate continued potential for expansion of high-grade mineralized zones:
  • At Minto East, a 50-metre step-out intersected 2.33% Cu, 1.98 g/t Au, and 22.3 g/t Ag (4.28% CuEq) over 4.3 m, in 26SCM178.
  • At Minto North, a 30-metre step-out intersected 2.22% Cu, 0.41 g/t Au, and 5.3 g/t Ag (2.59% CuEq) over 4.5 m, in 26SCM183, within a broader interval of 1.44% CuEq over 11.9 m.
• Initial results from infill drilling confirm continuity and increase confidence in priority resource areas:
  • At 117 Lens, 1.02% Cu, 0.35 g/t Au, and 4.2 g/t Ag (1.35% CuEq) over 22.7 m, from 316.9 m in 26SCM175.
• Technical field data collection has commenced in support of an upcoming planned feasibility study, including geotechnical drilling, geotechnical test pitting, geometallurgical testwork, and structural geological mapping.
• The 2026 Mineral Resource Estimate and Preliminary Economic Assessment is being finalized and on track for completion in July.

Vancouver, British Columbia and Pelly Crossing, Yukon–(July 8, 2026) – Selkirk Copper Mines Inc. (TSXV:SCMI) (FSE:IO20) (OTCQB:SKRKF) (“Selkirk Copper” or the “Company“) is pleased to announce initial results from the Phase 2 drill program which commenced in May 2026, at the Minto Project in Yukon, Canada.

M. Colin Joudrie, President & CEO, commented: “I continue to be impressed with the Selkirk Copper team’s ability to progress a wide range of technical- and commercially-focused work programs in support of the planned feasibility study which is expected to commence in Q3 2026. The data being collected in the Phase 2 50,000 meter drill program, including geotechnical data collection, geometallurgical testwork, and infill drilling, will support feasibility level detailed mine plans. Excellent drill productivity has the Phase 2 program completing well ahead of schedule which further demonstrates the team’s ability to execute our planned work on time and below budget.

Our exploration and discovery team, applying fundamental geoscience know-how and experience, closely coordinated with resource modeling and mine planning teams, continues to meaningfully expand zones of mineralization at Minto North, Minto East, Copper Keel, Ridgetop, 118, and the newly discovered 117 and 301 lenses, all of which is being translated into integrated mine plans. A key objective of the Phase 1 and Phase 2 Drill Programs is to make meaningful additions to mine life in a cost-effective manner, thus far we are meeting this objective.

The updated Mineral Resource Estimate and Preliminary Economic Assessment are on target for completion in the second half of July which, respectively, will demonstrate the prospectivity of the geological system as well as the fundamentals of the investment opportunity we see in the Minto Project.”

2026 Phase 2 Drill Program
Four drill rigs are active on the Phase 2 drill program, which commenced on May 1, 2026. This drill program is targeting 50,000 metres with a focus on expansion, exploration, and infill drilling to support resource expansion of key target areas as well as increased resource confidence.

Drill productivity has been consistently high throughout the first two months of the Phase 2 program. Drilling rates have achieved up to 220 metres per day for a single drill, and daily productivity is averaging approximately 120 metres per day. The high productivity is attributed to an experienced team that is benefiting from site-specific knowledge that has been developed over the past nine months. A robust core logging process is maintained to ensure new drill core is reviewed and interpreted on a daily basis. The team continues to focus on quality, consistency, efficiency, and safety for all aspects of the drill program as well as other activities on site.

As of June 30, 27,300 metres of drilling has been completed in 104 holes, comprising 54% of the planned 50,000 metres. Reported here are results from the first nine holes drilled in May. Turnaround time for assay results is currently six to eight weeks. The drill program is anticipated to continue until approximately late August with assay results expected to be released throughout the summer and fall of 2026.

2026 Technical Field Data Collection
In addition to the resource drilling program described above, the company has initiated a technical data collection program that will inform an upcoming Feasibility Study that is planned for completion in mid-2027. The team is making maximum use of the summer months to collect field data across the project area.

Technical data collection scopes this summer include the following:

• Geotechnical data collection, including diamond drilling, sonic drilling, and test pitting; with a focus on characterization of bedrock, soil, and groundwater in proximity to planned infrastructure including open pits, underground development and stopes, portal and decline, ventilation raises, waste rock storage facilities, tailings facilities, and water diversions.
• Geometallurgical sampling and testwork; with a focus on improved characterization of mineralization styles across the project including sulphide and partially oxidized mineralization, with the goal of optimizing performance of the mine and mill.
• Structural geological modelling, including oriented core logging; field mapping, and drone photogrammetry surveys; with a focus on characterization of faults, joints, and foliation fabrics that inform geotechnical designs and resource estimation.
• Drill hole surveys, including optical and acoustic televiewer surveys, and borehole geophysical surveys; with a focus on characterizing physical rock properties, joints, and faults that will inform geotechnical designs and geological modelling.
• Ongoing environmental monitoring and baseline surveys, including fisheries, aquatics, vegetation, wildlife, archaeology and other discipline-specific studies, with a focus on supporting the Environmental Assessment, Feasibility Study, and exploration activities.

Table 1: Summary of Phase 2 Drilling Completed by Location

Figure 1: Plan view of the Minto Mine Property showing surface projections of mineralized zones as well as Phase 1 and Phase 2 drill collars. Drill hole results presented here are highlighted. 

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11605/304362_bddd6fc394ce9ac2_001full.jpg

Minto North Drill Results

At Minto North, the Phase 2 drill program is testing for expansion of mineralized lenses as well as infill drilling of planned priority mining areas. Reported here are three holes drilled at the 120 Lens, which has not been previously investigated by Selkirk Copper.

Results from three drill holes targeting the 120 Lens indicate that mineralization in this location is characterized by folioform and disseminated chalcopyrite, bornite, and associated with magnetite. Host rocks for mineralization are pervasively foliated granodiorite and migmatite, similar to other mineralized areas within Minto North.

Additionally, the Phase 2 drill holes reported here targeting the 120 Lens represent the first-ever oriented core structural information collected in this location. Historical workers had interpreted significant structural complexity at Minto North, but very little structural data was available. Results of the drilling reported here will provide important information on joint orientation, foliation fabric, and mineralized trends that will be used to inform subsequent geotechnical designs and detailed resource modelling.

Hole 26SCM183 targeted a 30-metre step-out west of previous drilling in the northwestern part of the 120 Lens. This hole intersected high grade mineralization comprising 2.22% Cu, 0.41 g/t Au, and 5.3 g/t Ag (2.59% CuEq) over 4.5 m, within a broader interval of 1.16% Cu, 0.31 g/t Au, and 3.2 g/t Ag (1.44% CuEq) over 11.9 m. The results of this hole indicate that high-grade mineralization remains open for further expansion westwards in this location. Further drilling is planned to follow-up on this hole.

Hole 26SCM186 targeted the northern portion of the 120 Lens, at the limits of previous drilling. This hole intersected a broad interval of moderate grade mineralization comprising 0.41% Cu, 0.09 g/t Au, and 1.8 g/t Ag (0.51% CuEq). The results of this hole indicate that a broad width of mineralization remains open to the north, however the lower grade observed in this hole may not warrant immediate follow-up.

Figure 2: Cross section view of Minto North highlighting Phase 2 drill results from the 120 Lens

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11605/304362_bddd6fc394ce9ac2_002full.jpg

117 Lens Drill Results

In the Minto Main area, follow-up drilling on the 117 Lens is a priority objective of the Phase 2 drill program. This target, discovered during the Phase 1 Drill program, is located close to existing underground mining infrastructure and has the potential to be a low-cost addition to the restart mine plan. This newly discovered lens is a very good example of the outcomes of applying fundamental geosciences to exploration in a mature system.

The Phase 2 drilling at the 117 Lens will focus on exploration drilling to understand the extents of this zone; as well as infill drilling to confirm the grade and continuity within this zone. Reported here are results from the two holes drilled in this location as part of the Phase 2 program.

Hole 26SCM175 and 26SCM177 were drilled to infill between widely spaced previous drillholes. Both drill holes intersected significant mineralization, most notably 26SCM175 which intersected a broad interval comprising 1.02% Cu, 0.35 g/t Au, 4.2 g/t Ag (1.35% CuEq) over 22.7 m. Mineralization in this hole is characterized by folioform chalcopyrite and bornite hosted in pervasively foliated granodiorite. Results of this hole confirm the grade continuity and thickness of mineralization in this portion of the 117 Lens. Mineralization remains open to the north in this location, indicating a priority target for follow-up.

Area 118 Drill Results

In Area 118, follow-up drilling on the 301 Lens is a priority objective of the Phase 2 drill program. This target is located at relatively shallow depths immediately adjacent to the underground mine portal which presents the opportunity for low-cost development within a restart mine plan. This newly discovered lens is another good example of the prospectivity of the system that is being delivered by our exploration and discovery focused geosciences team.

The Phase 2 drilling in this area will focus on exploration drilling to investigate potential extensions to mineralization in several areas; as well as infill drilling to confirm the grade and continuity within the 301 Lens. Reported here are results from the first hole drilled in this location as part of the Phase 2 program.

Hole 26SCM181 targeted a gap in drilling located nearby to historical underground workings. This hole successfully intersected two mineralized intervals including: 0.69% CuEq over 29.1 m and 0.54% CuEq over 14.3 m (see Table 2 for detailed assays). The results of this hole confirm that relatively broad intervals of mineralization occur very close to existing underground development, however in this location the results are marginally economic. This area is being evaluated for potential follow-up drilling, however subsequent drilling has focused on the 301 Lens, as shown in Figure 3 below.

Figure 3: Plan view at the elevation of the 117 Lens and 301 Lens, approximately 200 metres below surface. This image highlights significant intercepts, historical mining areas, Phase 1 drill results, Phase 2 drill results, and holes that are pending results and planned for drilling.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11605/304362_bddd6fc394ce9ac2_003full.jpg

Minto East Drill Results

At Minto East, the Phase 2 drill program is targeting expansion of mineralized lenses at Minto East, with a focus on investigating an under-explored area between Minto East and Minto Main. Reported here are the results from three holes drilled at the same collar location on different azimuths.

The three holes reported here all intersected narrow intervals of high-grade mineralization around 70 to 140 metres depth. Significant intervals include: Hole 26SCM174 which intersected 3.38% CuEq over 2.2 metres; Hole 26SCM176 which intersected 3.53% CuEq over 1.9 metres; and Hole 26SCM178 which intersected 4.28% CuEq over 5.9 metres. Results of these holes are interpreted to indicate that narrow zones of high-grade mineralization extend beyond the limits of previous mining in the Minto Main area. This area is being evaluated for potential follow-up drilling.

Figure 4: Drill core photographs of high-grade mineralization at Minto North and the 117 Lens. 

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11605/304362_bddd6fc394ce9ac2_004full.jpg

Table 2: Collar Locations and Header Information

Table 3: Significant Interval Table

QAQC Procedures and Data Validation

The Company is drilling NQ sized core. Following data collection, core is cut along the long axis, with half of the core going to the lab for chemical analysis and the remaining half kept in sequence as record. The half core samples are packaged with the corresponding sample tag id and sealed. All sampling is conducted by Selkirk Copper Mines Inc. and subject to Company standard internal quality control and quality assurance (QAQC) programs. QAQC procedures include the insertion of certified reference material, coarse blank materials, and field duplicate analysis, as well as standard laboratory procedures to monitor contamination during preparation, analytical accuracy, and precision. QAQC insertion rates by Selkirk Copper approximate 15% of all samples at set intervals.

For the Phase 2 drill program, all samples were sent to ALS’s prep facility in Whitehorse, then shipped to ALS’s analytical laboratory in Vancouver. All samples are prepared by crushing rock to 70% passing 2mm screen, then splitting a 250g sub-sample using a riffle splitter before being pulverized 85% passing 75 microns. Gold is analyzed by 30 g Fire Assay (Au-AA23) with atomic absorption (AAS) analysis followed by gravimetric finish for overlimit results. Copper is analyzed by four-acid digest (ME-ICP61) with inductivity coupled plasma – atomic emission spectroscopy (ICP-AES) finish. If copper overlimit results are triggered a second four-acid digest for high grade copper (Cu-OG62) is conducted. Samples containing greater than 1000 ppm copper are also analyzed for soluble copper using a sulphuric acid leach (Cu-AA05) analysis with AAS finish is performed. ALS Vancouver holds an ISO/IEC 17025 standard accreditation.

QAQC results are reviewed by Selkirk Copper upon receipt of assay results. Overall, QAQC results show strong analytical performance across Cu, Au, and Ag datasets. All control standards are within acceptable tolerance, with no significant outliers or systematic bias observed.

Primary intervals are reported as drill core length, with true widths estimated to be approximately 90% of core lengths, based on the sub-horizontal to shallow-dipping nature of the modelled mineralized zones.

Mineral Resource Estimate Details

The following table summarizes the current Minto Mineral Resource Estimate:

Table 4: Global Mineral Resource Estimate for the Minto Project (Effective Date: April 7, 2025)

References

1 See 2025-08-06 Technical Report “NI 43-101 2025 Mineral Resource Estimate Update for the Minto Property, Yukon, Canada” effective date 2025-04-07 filed by Venerable Ventures Ltd., available on SEDAR+ (sedarplus.ca).

Technical aspects of this news release have been reviewed, verified and approved by Leif Bailey, P.Geo., Director of Geoscience & Exploration of Selkirk Copper Mines Inc., who is a qualified person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.

About Selkirk First Nation

Selkirk First Nation is centered in Pelly Crossing, a community in central Yukon, 280 km north of Whitehorse. They are a self-governing First Nation, having signed its Final and Self-Government Agreements in 1997. Selkirk First Nation owns 4,740 square kilometers of Settlement Land, including 2,408 square kilometers where they own both the surface and subsurface. Selkirk First Nation is one of three self-governing Northern Tutchone First Nations in the Yukon. The Selkirk First Nation, indirectly, holds a controlling equity stake in Selkirk Copper.

About Selkirk Copper

Selkirk Copper is a well-financed, newly formed company with a controlling interest held by the Selkirk First Nation through its wholly owned subsidiary, that, in partnership with the Selkirk First Nation, is completing a thorough exploration drilling campaign and a restart and redevelopment plan for the former Minto copper-gold-silver mine based on best-in-class environmentally sustainable mining, development and reclamation practice. Selkirk Copper controls 26,850 hectares of prospective mineral claims located in the Minto-Carmacks copper belt as well as significant open-pit and underground infrastructure, a 4,100 tonne per day processing plant, 400-person full-rotation camp, water treatment facilities, numerous ancillary buildings, and mobile equipment centered on the former Minto copper-gold-silver mine. Selkirk Copper’s mineral tenure, operation infrastructure, access roads and powerline, is located on or adjacent to Lands of the Selkirk First Nation much of which is surrounded by prospective Selkirk First Nation Category A Lands.

Selkirk Copper Mines Inc. is listed on the TSX Venture Exchange under the symbol TSXV: SCMI, has a secondary listing on the Frankfurt Exchange under the symbol FSE: IO20, and its common shares trade under the symbol OTCQB: SKRKF on the OTCQB® Venture Market, a U.S. marketplace operated by OTC Markets Group Inc.

On behalf of the Board of Directors of Selkirk Copper Mines Inc.

M. Colin Joudrie
President and Chief Executive Officer

For more information, please contact:

M. Colin Joudrie, President & CEO
colin.joudrie@selkirkcopper.com
(604) 760-3157

Justin Stevens, Vice-President Corporate Development
justin.stevens@selkirkcopper.com
(604) 240-2959

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING INFORMATION

Except for the statements of historical fact, this news release contains “forward-looking information” within the meaning of applicable Canadian securities legislation. When used in this news release, the words “estimate”, “project”, “belief”, “anticipate”, “intend”, “expect”, “plan”, “predict”, “may” or “should” and the negative of these words, or variations thereon or comparable terminology are intended to identify forward-looking statements and information. The forward-looking statements and information in this news release include information relating to: the remainder of the Company’s drill program and integrating results into ongoing trade-off studies, the business plans and objectives of the Company, and future planned drilling and feasibility study work. Such forward-looking information is based on the Company’s expectations, estimates and projections as at the date of this news release.

By their nature, forward-looking statement involve known and unknown risks, uncertainties and other factors, which may cause actual result, performance or achievements to differ materially from those expressed or implied by such statements, including but not limited to: the potential inability of the Company to continue as a going concern, risks associated with potential governmental and/or regulatory action with respect to the Company’s operations, the potential inability of the Company to implement its business plan going forward. Such statements and information reflect the current view of the Company and are based on information currently available to the Company. In connection with the forward-looking information contained in this news release, the Company has made assumptions about the Company’s ability to execute on its business plans. The Company has also assumed that no significant events will occur outside the Company’s normal course of business. Although the Company believes that the assumptions inherent in the forward-looking information are reasonable, forward-looking information is not a guarantee of future performance and accordingly undue reliance should not be put on such information due to the inherent uncertainty therein.

Any forward-looking information speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking information, whether as a result of new information, future events or results or otherwise.

Featured Image @ Freepik

Contacts

President & CEO
M. Colin Joudrie
Selkirk Copper Mines Inc.
colin.joudrie@selkirkcopper.com
Vice-President Corporate Development
Justin Stevens
Selkirk Copper Mines Inc.
justin.stevens@selkirkcopper.com

Disclaimer. This is a paid press release.