Banyan Gold Intersects 1.05 g/t Gold over 52.8 metres and Bonanza-Grade Gold at Powerline Deposit, AurMac, Yukon, Canada

VANCOUVER, BC / ACCESS Newswire / September 17, 2026 / Banyan Gold Corp. (the "Company" or "Banyan") (TSXV:BYN)(OTCQB:BYAGF) is pleased to report new results from western portions of the Powerline Deposit ("Powerline"), AurMac Project ("AurMac"), Yukon, Canada. Drillhole AX-26-892B intersected 1.05 g/t gold ("Au") over 52.8 metres ("m") and drillhole AX-26-891 intersected 149.14 g/t Au over 0.4 m, within a wider interval of 0.56 g/t Au over 169.2 m. The results demonstrate the potential to improve grade and continuity in known mineralized domains on the margins of Powerline's near-surface higher-grade cores. The drilling forms part of Banyan's ongoing 2026 drill program focused on resource conversion, expansion and delineation of higher-grade mineralized domains within and adjacent to the current Mineral Resource.

Highlights from Powerline:

AX-26-873 - 1.18 g/t Au over 8.3 m, within 0.51 g/t Au over 50.5 m

AX-26-876 - 1.15 g/t Au over 13.9 m within 0.44 g/t Au over 51.5 m, including 16.5 g/t Au over 0.3 m

AX-26-878 - 1.37 g/t Au over 11.8m, including high-grade of 7.37 g/t Au over 0.5m and 9.78 g/t Au over 1.0 m

AX-26-891 - 149.14 g/t Au over 0.4m and 0.63 g/t Au over 19.9 m, all within 0.56 g/t Au over 169.2m

For context, the 0.56 g/t Au over 169.2 m composite in AX-26-891 is materially influenced by the 149.14 g/t Au over 0.4 m interval. Excluding that interval, the remaining 168.8 m averages approximately 0.21 g/t Au with the lower mineralized zone of 0.63 g/t Au over 19.9m. High-densities of extensional quartz veins are present throughout the full interval.

AX-26-892B - 1.05 g/t Au over 52.8 m, within 0.87 g/t Au over 69.7 m

AX-26-895 - 1.01 g/t Au over 17.2 m within 0.73 g/t Au over 26.6 m; includes high-grade of 6.72 g/t Au over 0.6 m and 10.30 g/t Au over 0.5 m

"These results demonstrate the opportunity to improve the grade, extent and continuity of mineralized domains along the current margins of Powerline's near-surface higher-grade cores," stated Tara Christie, President and CEO. "Hole AX-26-892B returned 1.05 g/t Au over 52.8 m, while AX-26-891 intersected several higher-grade intervals, including 149.14 g/t Au over 0.4 m. Together, the results support our strategy of targeting areas that could improve the grade profile and confidence of the AurMac resource. Our 2026 and planned 2027 drilling will continue to test the extent and expansion potential of higher-grade domains."

Figure 1: Plan map of AurMac, Yukon, Canada. Drillholes reported in this release highlighted in blue. Pending results are shown in green. Previously released 2026 drilling is shown in orange and all other diamond drilling in black. The reported holes extend higher-grade mineralized domains along the margins of Powerline's near-surface high-grade cores. Detailed drill hole maps and sections are included below with Powerline South (Figure 2), Powerline Southwest (Figure 3) and Powerline West (Figure 4).

Figure 2: Plan map of Powerline South. Cross sections denoted by blue lines.

Figure 3: Plan map of Powerline Southwest. Cross sections denoted by blue lines.

Figure 4: Plan map of Powerline West. Cross sections denoted by blue lines.

Figure 5: Cross-section 466750mE through Powerline South at AurMac. Mineralized domains are overlaid on the lithological model. Mineralization remains open down-dip at depth, with the high-grade interval in AX-26-891 (Figure 5) highlighting the potential to extend mineralized domains and upgrade domains on the margins of high-grade cores. The MRE block model is constrained by mineralized and lithological domains. Mineral Resource blocks are 10 m x 10 m x 5 m. Only blocks above the 0.30 g/t Au cut-off and within the US$3,500/oz Au conceptual pit shell are included in the MRE.

Figure 6: Cross-section 466100mE through Powerline West at AurMac. Mineralized domains are overlaid on the lithological model. Mineralization remains open down-dip at depth and highlights the potential to extend mineralized domains and upgrade domains on the margins of high-grade cores. The MRE block model is constrained by mineralized and lithological domains. Mineral Resource blocks are 10m x 10m x 5m. Only blocks above the 0.30 g/t Au cut-off and within the US$3,500/oz Au conceptual pit shell are included in the MRE.

Figure 7: Cross-section 466250mE through Powerline Southwest at AurMac. Mineralized domains are overlaid on the lithological model. Mineralization remains open down-dip at depth, highlighting the potential to extend mineralized domains and upgrade domains on the margins of high-grade cores. The MRE block model is constrained by mineralized and lithological domains. Mineral Resource blocks are 10m x 10m x 5m. Only blocks above the 0.30 g/t Au cut-off and within the US$3,500/oz Au conceptual pit shell are included in the MRE.

Figure 8: Cross-section 467000mE through Powerline South at AurMac. Mineralized domains are overlaid on the lithological model. Mineralization remains open down-dip at depth, highlighting the potential to extend mineralized domains and upgrade domains on the margins of high-grade cores within Powerline. The MRE block model is constrained by mineralized and lithological domains. Mineral Resource blocks are 10m x 10m x 5m. Only blocks above the 0.30 g/t Au cut-off and within the US$3,500/oz Au conceptual pit shell are included in the MRE.

Lithological domains at Powerline are dominated by metasedimentary rocks of various compositions, typically mica-chlorite schists with varying calcareous content. Domains shown in this section are: CLSR_4 and 5 - chlorite-sericite schist; CSCH_1 and 3 - calcareous schist; and sch_2 - heterogeneous schist. Altered host rocks with intense silicification and meta-greenstones are preferential host for extensional quartz veining (Figures 9 and 11).

Figure 9: Mineralized extensional quartz veins in metasedimentary rocks in Powerline South from diamond drillhole AX-26-891. The large gold grain at 71.95 m is associated with Bonanza grade assay of 149.14 g/t Au over 0.4 m from an extensional quartz vein with arsenopyrite and sulphosalts, within a wider interval of 0.56 g/t Au over 169.2 m. High-density of extensional quartz veins (>3 veins/m) with bismuth-sulphosalts, arsenopyrite, and pyrite are present throughout the interval from 71.8-241.0m. Several other instances of visible gold were observed at 134.4 m, 150.6 m, 162.2 m and 238.0 m (Figure 10), all associated with individual assays >5.0 g/t Au over 0.3 to 0.5m.

Figure 10: Visible gold occurrences in extensional quartz veins from Powerline: Top left: gold grain intergrown with arsenopyrite and sphalerite - AX-26-891 at 134.4 m. Top right: gold grain intergrown with acicular bismuth sulphosalts - AX-26-891 at 150.6 m. Bottom left; gold grain with spatially associated arsenopyrite aggregates - AX-26-891 at 162.2 m. Bottom right: visible gold grain intergrown and associated with arsenopyrite aggregates - AX-26-891 at 238.1 m.

Figure 11: Mineralized extensional quartz veins in metasedimentary rocks in Powerline South from diamond drillhole AX-26-892B. High-density of large extensional quartz veins (>3 veins/m) with bismuth-sulphosalts, arsenopyrite, and pyrite are present throughout the interval from 87.6-140.4m, with multiple instances of visible gold (Figure 12).

Figure 12: Visible gold occurrences in extensional quartz veins from Powerline: Top left: gold grains intergrown with bismuth sulphosalts - AX-26-873 at 53.5m. Top right: gold grains intergrown with acicular arsenopyrite and bismuth sulphosalt masses - AX-26-873 at 138.4 m. Bottom left: gold grain in extensional quartz vein with spatially associated arsenopyrite - AX-26-892B at 88.4m. Bottom right: visible gold grain intergrown and associated with arsenopyrite grain - AX-26-892B at 101.8 m.

Table 1: Intervals from Powerline

HOLE NUMBER	depth from	depth to	Au Interval (m)	Au Grade (g/t)
AX-26-870	86.3	87.4	1.1	1.70
and	119.0	124.9	5.9	1.34
including	119.0	120.2	1.2	1.01
and including	121.9	123.4	1.5	3.41
and	140.8	156.3	15.5	0.41
including	150.7	152.0	1.3	3.03
and	176.6	191.2	14.6	0.31
including	189.9	190.3	0.4	6.98
and	230.2	252.8	22.6	0.35
including	230.2	231.4	1.2	4.26
AX-26-872	78.0	109.2	31.2	0.42
including	78.0	93.0	15.0	0.74
including	78.0	78.3	0.3	14.04
and including	84.6	85.3	0.7	4.00
and	132.7	135.6	2.9	1.44
including	132.7	133.3	0.6	6.17
and	149.2	179.0	29.8	0.41
including	149.2	159.1	9.9	0.74
including	158.6	159.1	0.5	9.26
and including	174.1	175.3	1.2	2.49
AX-26-873	49.6	53.8	4.2	0.50
and	128.4	178.9	50.5	0.51
including	137.7	138.6	0.9	8.82
and including	151.4	152.4	1.0	3.78
and including	169.2	177.5	8.3	1.18
and	197.4	269.4	72.0	0.31
including	197.4	198.8	1.4	2.25
and including	239.4	244.5	5.1	1.03
and including	268.2	269.4	1.2	1.05
AX-26-876	129.4	179.1	49.7	0.55
including	133.1	137.5	4.4	1.12
and including	150.7	153.5	2.8	1.51
and including	167.1	168.5	1.4	1.21
and including	177.8	178.2	0.4	2.46
and	205.3	223.3	18.0	0.38
and	262.0	313.5	51.5	0.44
including	262.0	263.0	1.0	1.15
and including	297.0	310.9	13.9	1.15
including	297.0	298.5	1.5	3.72
and including	310.6	310.9	0.3	16.50
and	393.7	447.8	54.1	0.41
including	410.8	421.7	10.9	0.50
and including	433.2	433.7	0.5	1.10
and including	445.8	447.8	2.0	1.36
AX-26-878	104.4	110.3	5.9	0.63
including	104.4	105.4	1.0	1.16
and including	109.1	110.3	1.2	1.37
and	126.4	163.1	36.7	0.30
including	139.5	141.0	1.5	3.69
and	189.0	236.7	47.7	0.24
including	226.8	227.9	1.1	1.33
and including	235.6	236.7	1.1	2.04
and	252.4	264.2	11.8	1.37
including	255.2	255.7	0.5	7.37
and including	263.2	264.2	1.0	9.78
and	281.1	283.9	2.8	2.52
and	332.4	333.6	1.2	2.68
AX-26-887	31.3	146.5	115.2	0.41
including	31.3	31.9	0.6	1.12
and including	47.3	48.2	0.9	4.82
and including	63.0	113.5	50.5	0.58
including	64.9	65.4	0.5	14.24
and including	82.6	83.1	0.5	7.57
and including	86.8	87.2	0.4	3.09
and including	137.8	139.2	1.4	3.32
and including	145.9	146.5	0.6	1.32
and	170.9	172.4	1.5